Taking apart a double wall tumbler can seem daunting, but with the right tools and techniques it can be done safely and easily. Double wall tumblers have an inner and outer stainless steel wall separated by an air gap for insulation. This allows drinks to stay hot or cold longer. While useful, it does make disassembly trickier. Here is a step-by-step guide on how to take apart a double wall tumbler.
Necessary Tools and Safety Tips
To take apart a double wall tumbler you will need:
- Rubber gloves to protect your hands
- Eye protection like safety glasses
- Flat head screwdriver
- Needle nose pliers
- Soft faced mallet or hammer
Be sure to follow these safety tips:
- Wear eye and hand protection at all times
- Work slowly and carefully especially when prying
- Lay tumbler on its side on a soft surface like a towel
Step-by-Step Disassembly Process
Remove Bottom Rubber Seal
- Lay the tumbler on its side
- Locate the seam where the bottom meets the outer wall
- Insert a flat head screwdriver into the seam
- Gently pry along the edge to pop out the rubber seal
Remove Bottom Cap
- Grab bottom cap with pliers
- Twist counter clockwise while pulling up
- Bottom cap should detach from inner wall
Separate Inner and Outer Walls
- Turn tumbler right side up
- Place hand inside and push up on inner wall
- Tap gently on the outside of outer wall with a mallet
- The two walls should begin separating
- Once separated, slide inner wall out
Detach Lid
- The drinking lid likely uses a threaded design
- Turn the lid counter clockwise to detach from top outer wall
Reassembly Tips
To put your tumbler back together follow the reverse steps. Here are some useful tips:
- Make sure bottom rubber seal is fully inserted
- Bottom cap should thread evenly into inner wall
- Rejoin walls before reattaching lid for easier assembly
- Don't over tighten lid or cross thread
With the right tools and patience, disassembling your double wall tumbler is totally doable. Just remember to work slowly and carefully. Enjoy keeping your tumbler functioning properly.
FAQs About Disassembling Double Wall Tumblers
What are double wall tumblers made of?
Double wall tumblers consist of two stainless steel walls separated by an insulating air gap. The inner and outer walls are made of stainless steel for durability.
Why take apart a double wall tumbler?
You may want to disassemble your tumbler to clean inside the walls, make repairs, or replace broken components. Taking them apart allows full access.
Can you put a double wall tumbler in the dishwasher?
No, dishwashers can damage the vacuum seal. It's best to clean them by hand after disassembling.
How do you fix a double wall tumbler lid?
If the lid is broken you'll need to fully detach it by unscrewing the top segment. Replace with a new compatible lid.
How do you reseal a double wall tumbler?
To reseal the vacuum, you'll need a food sealer or vacuum pump. Rejoin the walls and use the sealer to remove interior air.
Conclusion
Taking apart a double wall tumbler may seem challenging but with some basic tools and patience it can be done safely. Just remember to work slowly, wear protective gear, and follow the proper disassembly steps. Proper disassembly allows for cleaning, repairs and keeps your tumbler functioning optimally. With reassembly, you'll be able to enjoy your tumbler for many years to come.
